How To Get Candle Wax Off A Marble Table

How to Remove Candle Wax from a Marble Table

Candle wax can be a difficult substance to remove from any surface, but it can be especially challenging on a delicate surface like marble. However, with the right cleaning methods, it is possible to remove candle wax from marble without damaging the stone.

Materials You'll Need:

Soft cloths
Plastic scraper
Hair dryer or heat gun
Baking soda
Water
Marble cleaner or mild dish soap

Steps:

1. Allow the Wax to Harden

If the wax is still soft, wait for it to cool and harden completely. This will make it easier to remove.

2. Scrape Away Excess Wax

Using a plastic scraper, gently scrape away as much excess wax as possible. Be careful not to scratch the marble.

3. Heat the Remaining Wax

Use a hair dryer or heat gun to heat the remaining wax until it becomes soft and pliable. Do not overheat the marble, as this could damage it.

4. Remove the Softened Wax

Once the wax is soft, use a soft cloth to wipe it away. If there is any residue left, repeat the heating and wiping process.

5. Create a Baking Soda Paste

Mix baking soda with a little water to create a paste. Apply the paste to the area where the wax was and let it sit for a few minutes.

6. Scrub and Rinse

Scrub the baking soda paste into the marble using a soft cloth. Rinse the area with clean water and dry it thoroughly.

7. Clean the Marble

To remove any remaining residue, clean the marble with a marble cleaner or mild dish soap and water. Dry the marble thoroughly.

Tips:

Always test the cleaning method on an inconspicuous area first.
Use the lowest heat setting possible when using a hair dryer or heat gun.
Do not use harsh chemicals or abrasive cleaners on marble.
If the wax has penetrated deeply into the marble, it may be necessary to call a professional cleaning service.