How To Level A Three Piece Slate Pool Table

A level pool table is essential for accurate gameplay and to prevent damage to the table. If your pool table is not level, it can cause the balls to roll erratically and make it difficult to make shots. Leveling a three piece slate pool table is not a difficult task, but it does require some time and patience. Here are the steps on how to level a three piece slate pool table:

1. Gather your tools. You will need the following tools to level your pool table:

A spirit level
A 9/16" socket wrench
A 3/8" socket wrench
A set of shims
A rubber mallet

2. Remove the rails from the table. The rails are the wooden sides of the table that hold the slate in place. To remove the rails, use the 9/16" socket wrench to loosen the bolts that hold the rails to the slate. Once the bolts are loose, you can lift the rails off the table.

3. Level the slate. Once the rails are removed, you can level the slate. To do this, place the spirit level on the slate and adjust the shims until the slate is level in both directions. Once the slate is level, tighten the bolts that hold the shims in place.

4. Reattach the rails to the table. Once the slate is level, you can reattach the rails to the table. To do this, place the rails on the table and tighten the bolts that hold them in place. Use the 3/8" socket wrench to tighten the bolts until they are snug.

5. Test the table. Once the rails are reattached, test the table to make sure it is level. To do this, place the spirit level on the table and check to make sure that the table is level in both directions. If the table is not level, adjust the shims until it is.

Leveling a three piece slate pool table is not a difficult task, but it does require some time and patience. By following these steps, you can ensure that your pool table is level and ready for play.