How To Level A 3 Slate Pool Table

How to Level a 3 Slate Pool Table

Owning a pool table is an excellent way to enjoy a classic game with friends and family. However, to get the most out of your pool table, it is important to make sure that it is level. A level pool table will ensure that the balls roll smoothly and that the game is fair. If your pool table is not level, it can be frustrating, as it will make it difficult to play accurately.

Leveling a pool table can seem like a daunting task, but it is actually quite simple if you have the right tools and follow the correct steps. Here is a step-by-step guide on how to level a 3 slate pool table:

Tools You Will Need:

4-foot level
8-foot level
Carpenter's square
Wrench
Shim

Step 1: Inspect the Table

Before you begin leveling the pool table, inspect it for any damage. If there is any damage, you will need to repair it before you can level the table.

Step 2: Level the Slate

Once the table is inspected, you can begin leveling the slate. To do this, place the 4-foot level on the slate in the center of the table. If the level is not level, you will need to adjust the slate by turning the bolts that are located under the slate. Turn the bolts until the level is level.

Step 3: Check the Sides of the Table

Once the slate is level, you need to check the sides of the table to make sure they are level. To do this, place the 8-foot level on each side of the table. If the level is not level, you will need to adjust the legs of the table by turning the bolts that are located at the bottom of the legs. Turn the bolts until the level is level.

Step 4: Check the Corners of the Table

Finally, you need to check the corners of the table to make sure they are level. To do this, place the carpenter's square in each corner of the table. If the square is not level, you will need to adjust the slate by turning the bolts that are located under the slate. Turn the bolts until the square is level.

Step 5: Retighten the Bolts

Once you have leveled the table, you need to re-tighten all of the bolts. This will ensure that the table does not move out of level. To re-tighten the bolts, use a wrench to turn the bolts until they are snug.

Step 6: Shim the Table

If you find that the table is still not level after you have tightened the bolts, you may need to shim the table. To shim the table, place a shim under one of the legs of the table. Shims are thin pieces of material that are used to level tables. Once you have placed a shim under the leg, re-tighten the bolt. Continue shimming the table until it is level.

Conclusion

Leveling a pool table is not difficult if you follow these steps. By taking the time to level your pool table, you will ensure that you have a great playing experience.