How To Make Drop Leaf Table Support

If you're looking for a way to add extra space to your table, a drop leaf is a great option. Drop leaves are hinged sections of tabletop that can be folded down when not in use, making them perfect for small spaces. They're also relatively easy to make, so you can save money by doing it yourself.

To make a drop leaf table support, you'll need:

1x6 pine board, cut to the length of your drop leaf
1x4 pine board, cut to the height of your drop leaf
Two 3-inch hinges
Wood screws
Drill
Countersink bit
Clamps

Instructions:

Attach the 1x6 board to the underside of your drop leaf, using wood screws. Countersink the screws so they're flush with the surface of the board.
Attach the 1x4 board to the edge of your drop leaf, using wood screws. Again, countersink the screws so they're flush with the surface of the board.
Attach the hinges to the 1x6 and 1x4 boards, making sure that the leaves are aligned properly when they're folded down.
Test the drop leaf support to make sure it works properly.

You can use this same basic method to make drop leaf supports for any size or shape of table. Just be sure to adjust the measurements of the boards and hinges accordingly.

Drop leaf supports are a great way to add extra space to your table without taking up too much room. They're also relatively easy to make, so you can save money by doing it yourself. With a little bit of time and effort, you can create a drop leaf table support that will last for years to come.