How To Disassemble A Pool Table Olhausen Classic

How to Disassemble an Olhausen Classic Pool Table

Disassembling an Olhausen Classic pool table is a complex task that requires careful attention to detail. By following these steps, you can safely disassemble your pool table and prepare it for storage or relocation.

Materials Required:

* Soft cloths or blankets * Flat-head screwdriver * Phillips-head screwdriver * Allen wrench set * Pool cue rack * Level * Measuring tape * Chalk

Step 1: Clear the Slate and Rails

* Remove all balls, racks, and accessories from the table. * Use a soft cloth or blanket to protect the slate. * Loosen the bolts that secure the rails to the slate using a flat-head screwdriver. * Carefully lift the rails off the slate and set them aside.

Step 2: Remove the Legs

* Use an Allen wrench to loosen the bolts that secure the legs to the frame. * Support the weight of the frame and carefully remove the legs. * Set the legs aside and protect them with a soft cloth or blanket.

Step 3: Disassemble the Frame

* Use a Phillips-head screwdriver to remove the screws that hold the frame together. * Carefully separate the frame components and set them aside.

Step 4: Remove the Pockets

* Use a flat-head screwdriver to remove the bolts that secure the pockets to the frame. * Carefully remove the pockets and set them aside.

Step 5: Disassemble the Cue Rack

* Use a Phillips-head screwdriver to remove the screws that hold the cue rack together. * Carefully disassemble the cue rack and set the components aside.

Step 6: Chalk the Rails

* Apply chalk to the rails where they will make contact with the slate to prevent sliding during reassembly.

Step 7: Level the Slate

* Place the slate on a level surface and use a level to ensure it is completely flat.

Step 8: Assemble the Frame

* Assemble the frame components and secure them with screws using a Phillips-head screwdriver.

Step 9: Attach the Rails

* Carefully place the rails on the slate, ensuring that the chalked surfaces align. * Secure the rails with bolts using a flat-head screwdriver.

Step 10: Attach the Pockets

* Position the pockets on the rails and secure them with bolts using a flat-head screwdriver.

Step 11: Attach the Legs

* Position the legs and secure them to the frame with bolts using an Allen wrench.

Step 12: Reinstall the Cue Rack

* Assemble the cue rack and secure it to the frame using screws using a Phillips-head screwdriver.

Tips:

* Take measurements and mark each component before disassembling to aid reassembly. * Use soft cloths or blankets to protect the table from scratches. * If any components are damaged or missing, consult the manufacturer for replacements. * Reassemble the table in the reverse order of disassembly. * Once the table is reassembled, carefully level it using a level.