Brookville Table Top Propane Fire Bowl Replacement

Brookville Table Top Propane Fire Bowl Replacement: A Comprehensive Guide

Replacing the fire bowl of your Brookville table top propane fire pit is essential for maintaining its functionality and safety. Here's a comprehensive guide to help you complete this task efficiently:

Gather the Necessary Tools

Before starting, ensure you have the following tools:

Wrench or socket set
Fire bowl replacement
New gasket
Propane tank (empty for safety)

Step 1: Shut Off Propane and Disconnect Tank

Start by turning off the propane valve on the tank. Once the flame goes out, disconnect the tank from the fire pit.

Step 2: Remove the Fire Bowl

Locate the bolts or screws holding the fire bowl in place. Use a wrench or socket set to loosen and remove them. Carefully lift the fire bowl up and set it aside.

Step 3: Replace the Gasket

Inspect the old gasket for wear or damage. Replace it with a new one, ensuring it's seated correctly in the groove around the edge of the fire bowl.

Step 4: Install the Replacement Fire Bowl

Position the new fire bowl over the gasket and align it with the screw holes. Lift it into place and tighten the bolts or screws securely.

Step 5: Inspect for Leaks

Reconnect the propane tank to the fire pit and open the valve slightly. Apply soapy water around the connections and check for bubbles, indicating a leak. If found, tighten the connections and retest.

Step 6: Ignite the Fire Pit

Once the connections are secure and leak-free, ignite the fire pit according to the manufacturer's instructions. Make sure the flame burns evenly and without any excessive noise or smoke.