Dining Table Bench With Back Plans

Dining Table Bench With Back Plans: Enhance Your Dining Experience

A dining table bench with a back not only adds a touch of style to your dining room but also provides additional seating and comfort for your family and guests. Building your own dining table bench is a relatively easy project that can be completed in a weekend. Here's a comprehensive guide to help you create a sturdy and stylish dining table bench with a back.

Materials and Tools

To build your dining table bench, you'll need the following materials:

1x8 pine boards (for the seat and back)
2x4 pine boards (for the legs and frame)
3/4-inch plywood (for the base)
Wood screws
Wood glue
Sandpaper or a sanding sponge
Finish (stain or paint)

You'll also need the following tools:

Circular saw or miter saw
Drill
Orbital sander
Clamps
Measuring tape
Level

Step 1: Cut the Pieces

Cut the following pieces of pine board:

Seat (x1): 1x8 pine board cut to your desired length (54 inches is a good standard size)
Backrest (x1): 1x8 pine board cut to your desired height (18 inches is a good standard size)
Apron (x2): 1x8 pine board cut to the length of the backrest (18 inches)

Cut the following pieces of 2x4 pine board:

Legs (x4): 2x4 pine board cut to your desired bench height (18 inches is a good standard size)
Stretchers (x2): 2x4 pine board cut to the length of the backrest minus 4 inches (14 inches)

Step 2: Assemble the Frame

1. Take the two legs and attach them to the stretchers using wood screws. 2. Make sure that the legs are flush with the inside edge of the stretchers. 3. Reinforce the corners with triangular braces cut from scrap plywood.

Step 3: Attach the Seat

1. Center the seat on top of the frame and secure it with wood screws. 2. Countersink the screws to create a smooth surface. 3. Fill any gaps with wood putty and let it dry.

Step 4: Attach the Backrest

1. Attach the aprons to the backrest using wood screws. 2. Center the backrest on the frame and attach it using wood screws. 3. Countersink the screws and fill any gaps with wood putty.

Step 5: Finishing

1. Sand the bench with sandpaper or an orbital sander to remove any splinters or rough edges. 2. Clean off any sanding dust. 3. Apply your desired finish (stain or paint). 4. Allow the finish to dry completely before using the bench.