Diy Laundry Folding Table Over Washer And Dryer

DIY Laundry Folding Table Over Washer and Dryer: A Comprehensive Guide

If you're tired of hunching over a pile of laundry on the floor or struggling with an unstable TV tray as a makeshift folding station, it's time to invest in a dedicated laundry folding table. In this article, we'll guide you through the essential aspects of building a DIY laundry folding table over your washer and dryer, so you can say goodbye to laundry day woes and enjoy the convenience of a dedicated folding space.

Materials and Tools:

Plywood (3/4-inch thickness recommended)
Wood screws
Wood glue
Drill
Screwdriver
Measuring tape
Pencil or woodworking marker
Clamps

Measurements:

The size of your folding table will depend on the dimensions of your washer and dryer. Measure the width and depth of the appliances, and add a few inches on each side for overhang. The table should be deep enough to accommodate folded laundry and prevent items from falling off.

Construction:

Cut the Plywood: Cut two pieces of plywood to the desired size of the folding table, allowing for a 2-3 inch overhang on all sides.
Assemble the Base: Align the two plywood pieces and secure them together with wood glue and screws. Clamp the pieces for a secure bond.
Create the Support: Cut two pieces of plywood for the support legs that will rest on the top of the washer and dryer. These should be long enough to provide sufficient support and high enough to allow the table to rest comfortably over the appliances.
Attach the Legs: Align the support legs with the base of the table and secure them with wood glue and screws. Reinforce the joints with additional screws or brackets for stability.
Install the Tabletop: Place the table over the washer and dryer, making sure it rests securely on the support legs. Check for levelness and adjust the support legs as needed.

Tips for Customization:

Consider adding a surface finish to the table such as paint or stain for protection and aesthetics.
Install drawers or shelves beneath the table for storage of laundry supplies or folded items.
Add a drop-down leaf to extend the work surface when needed.

With a little planning and effort, you can create a DIY laundry folding table over your washer and dryer that not only simplifies your laundry routine but also adds functionality and convenience to your laundry room. Enjoy the satisfaction of completing laundry tasks with ease and efficiency.