Graco Lauren Crib With Changing Table Assembly Instructions

Assembling Your Graco Lauren Crib With Changing Table: Step-by-Step Guide

Assembling your Graco Lauren Crib with Changing Table may seem like a daunting task at first, but with a bit of patience and these clear instructions, you'll have your baby's new sleeping and diaper-changing haven ready in no time.

Tools You'll Need:

Phillips screwdriver
Allen wrench (provided)
Hammer (for nail-on hardware)

Step 1: Unbox and Identify Parts

Carefully unbox all the components and check if you have everything you need. Each part should be labeled with a letter or number for easy reference.

Step 2: Assemble the Crib Frame

Use the provided screws and the Allen wrench to connect the headboard (A) to the footboard (B). Insert the side rails (C and D) into the headboard and footboard slots, making sure they are facing the correct way. Secure them with screws.

Step 3: Install the Crib Mattress Support

The crib mattress support (E) has two positions: high and low. Determine which position you prefer for your baby and install the support accordingly. Use the provided screws to attach it securely to the crib frame.

Step 4: Assemble the Changing Table

Connect the changing table legs (F) to the drawer chassis (G) using screws. Slide the drawer front (H) into place and secure it with the provided plastic clips.

Step 5: Attach the Changing Table to the Crib

Align the changing table with the side of the crib where you want it to be located. Use the provided screws and a screwdriver to attach the changing table to the crib frame.

Step 6: Install the Backboard

Position the backboard (I) against the back of the crib and use screws to attach it to the headboard and footboard.

Step 7: Install the Crib Slats

Insert the crib slats (J) into the slots on the side rails, ensuring they fit snugly. Use a hammer to gently tap them in if necessary.

Step 8: Assemble and Install the Drawer

Slide the drawer rails (K) into the drawer chassis. Place the drawer (L) on the rails and push it in until it clicks into place.

Step 9: Safety Checks

Before using the crib, perform the following safety checks:

Ensure all screws and bolts are securely tightened.

Check that the mattress support is stable and securely locked in place.

Make sure the changing table is firmly attached to the crib.

Congratulations! You have now successfully assembled your Graco Lauren Crib with Changing Table. Enjoy watching your little one sleep and play in their new cozy environment.