How To Correctly Set A Pool Table

How to Correctly Set a Pool Table

Setting up a pool table correctly is crucial for both the longevity of the table and the enjoyment of the game. By following a few simple steps, you can ensure that your pool table is level, stable, and will provide years of enjoyment.

Step 1: Level the Table

The first step is to level the table. To do this, you will need a level and a shim or two. Place the level on the bed of the table and use the shims to level it. Once the bed is level, check the rails. If the rails are not level, use the shims to level them as well.

Step 2: Tighten the Bolts

Once the table is level, you will need to tighten the bolts. Begin by tightening the bolts that hold the bed to the frame. Then, tighten the bolts that hold the rails to the bed. Finally, tighten the bolts that hold the legs to the frame.

Step 3: Adjust the Height

The next step is to adjust the height of the table. The ideal height for a pool table is 30 inches from the floor to the top of the bed. To adjust the height, use the bolts that are located at the bottom of the legs. Turn the bolts clockwise to raise the table and counterclockwise to lower it.

Step 4: Install the Felt

Once the table is level and the height is adjusted, you can install the felt. Start by attaching the felt to the rails. Then, stretch the felt over the bed and secure it with the staples or tacks. Be sure to pull the felt tight so that it is wrinkle-free.

Step 5: Install the Pockets

The final step is to install the pockets. Start by attaching the brackets to the rails. Then, insert the pockets into the brackets. Be sure to push the pockets all the way in so that they are flush with the rails.

Conclusion

Setting up a pool table correctly is a simple process that can be completed in a few hours. By following the steps outlined above, you can ensure that your pool table is level, stable, and will provide years of enjoyment.