How To Make A Folding Table Out Of Wood

A folding table is a great way to add extra seating or surface space to your home without taking up too much room. They are perfect for small apartments, dorm rooms, or any other space where space is at a premium. Folding tables are also relatively easy to make, so you can save money by building your own.

Here is a step-by-step guide on how to make a folding table out of wood:

Materials

1x4 pine boards (12 pieces, cut to 24 inches long)
1x2 pine boards (4 pieces, cut to 18 inches long)
1/2-inch plywood (1 piece, cut to 24 inches x 36 inches)
Wood glue
1-inch wood screws
2-inch wood screws
Finishing nails
Hammer
Drill
Countersink bit
Sandpaper
Paint or stain (optional)

Instructions

1. Assemble the frame

Start by assembling the frame of the table. To do this, lay out the 1x4 pine boards on a flat surface, spacing them evenly apart. Apply wood glue to the edges of the boards, and then screw them together using 1-inch wood screws. Once the frame is assembled, set it aside.

2. Attach the plywood top

Next, attach the plywood top to the frame. To do this, apply wood glue to the top of the frame, and then place the plywood on top. Screw the plywood to the frame using 2-inch wood screws. Be sure to countersink the screws so that they are flush with the surface of the plywood.

3. Reinforce the table

Once the plywood top is attached, it is important to reinforce the table so that it can withstand the weight of items placed on it. To do this, cut two of the 1x2 pine boards in half, and then screw them to the underside of the table, running perpendicular to the frame. The other two 1x2 pine boards should be screwed to each end of the table, running parallel to the frame.

4. Sand and finish the table

Once the table is assembled, sand it smooth using sandpaper. You can then paint or stain the table to match your décor. If you choose to paint the table, be sure to apply a primer first.

Your folding table is now complete! Enjoy using it in your home.