Restoration Hardware Coffee Table Knock Off

DIY Restoration Hardware Coffee Table Knock Off: A Step-by-Step Guide

Transform your living space with the timeless elegance of the Restoration Hardware coffee table, recreated in an economical and accessible DIY project. Delve into the fundamental aspects of this artisanal masterpiece and master the techniques to construct your own stunning knock-off.

Materials:

Prepare the following materials for your project:

1x6 pine boards (for tabletop and shelf)
2x4 pine boards (for legs)
Wood glue
Wood screws (1 1/4 inch and 2 1/2 inch)
Brad nails
Sandpaper (coarse and fine)
Wood stain (color of your choice)
Polyurethane (matte or satin finish)

Step-by-Step Instructions:

1. Assemble the Tabletop:

Join the 1x6 pine boards edge-to-edge using wood glue and brad nails. Ensure the edges are flush and sanded smooth.

2. Build the Shelf:
Lay another set of 1x6 pine boards across the width of the tabletop, leaving a 6-inch overhang on each end. Attach with wood glue and screws.

3. Construct the Legs:

Cut the 2x4 pine boards to 18 inches in length. Attach them to the corners of the tabletop using wood glue and screws.

4. Assemble the Base:
Connect two 2x4 pine boards perpendicularly to form a "T" shape. Secure the "T" shape to the center of the shelf using screws.

5. Finishing Touches:

Sand the entire table thoroughly. Apply wood stain and allow it to dry. Seal the table with polyurethane for protection and a desired finish.

Tips and Tricks:

Use a wood filler to conceal any nail or screw holes.
Experiment with different wood stains to achieve your preferred color.
Add decorative elements such as casters or metal brackets for a customized look.

Enjoy Your Masterpiece:

Step back and admire your beautifully crafted Restoration Hardware coffee table knock-off. This DIY project not only saves you a significant amount of money but also allows you to personalize your living space with a unique and stylish piece of furniture.