Storkcraft Aspen Changing Table Assembly Instructions

Essential Aspects of Storkcraft Aspen Changing Table Assembly Instructions

Congratulations on your new Storkcraft Aspen Changing Table! To ensure a safe and secure assembly, please follow these instructions carefully. This guide will provide you with step-by-step guidance and essential tips to ensure a successful assembly process.

Before you begin, gather all necessary tools and materials. You will need a Phillips screwdriver, a flathead screwdriver, and the enclosed hardware. Ensure you have sufficient space to work comfortably and avoid distractions.

Step 1: Identify and Separate Components

Open the packaging and carefully remove all components. Identify each piece according to the assembly diagram provided. Separate the hardware into small groups to avoid confusion during assembly.

Step 2: Assemble the Base Frame

Attach the side panels to the baseboard using the provided screws. Tighten the screws securely to ensure stability. Connect the front and back panels to the assembled side panels using the remaining screws.

Step 3: Install the Changing Table Top

Position the changing table top on the assembled base frame, aligning it with the pre-drilled holes. Secure the top using the provided screws, ensuring they are evenly tightened.

Step 4: Install Drawers and Hardware

Insert the drawer bases into the drawer slides attached to the changing table. Push them in until they click into place. Install the drawer knobs onto the drawer fronts using the provided screws.

Step 5: Secure the Changing Table Rails

Attach the changing table rails to the top of the changing table. Align the holes on the rails with the pre-drilled holes on the top and secure them with the provided screws.

Step 6: Mount the Safety Straps

Locate the safety straps and insert them into the slots on the changing table rails. Tighten the straps securely to prevent the changing table from wobbling during use.

Tips for Success

Check the hardware carefully before assembly to ensure you have all necessary pieces.
Tighten all screws firmly, but avoid overtightening.
If you encounter any difficulties, refer to the assembly diagram or seek assistance.
Keep the assembly area well-lit and free from obstructions.
Double-check the assembly after completion to ensure it is secure and stable.

By following these instructions and tips, you can successfully assemble your Storkcraft Aspen Changing Table and provide a safe and secure changing station for your little one.